Show simple item record

dc.contributor.authorAlba de Sánchez, Nelly Ceciliaspa
dc.contributor.authorEsguerra Arce, Johannaspa
dc.contributor.authorAguilar Castro, Yesidspa
dc.contributor.authorAperador, Willianspa
dc.contributor.authorBolaños, Gilbertospa
dc.contributor.authorRincón, Carlos Albertospa
dc.coverage.spatialUniversidad Autónoma de Occidente. Calle 25 115-85. Km 2 vía Cali-Jamundíspa
dc.identifier.citationAlba de Sánchez, Nelly Cecilia; Esguerra Arce, Johanna; Aguilar Castro, Yesid; Aperador, Willian; Bolaños, Gilberto; Rincón, Carlos Alberto. Adherence and electrochemical behavior of calcium titanate coatings onto 304 stainless steel substrate. En: Revista Mexicana de Física. Volumen 60, (mayo-junio 2014); páginas 210-216spa
dc.description.abstractCalcium titanate has been proposed as a coating for biomedical applications but it has not been reported characterization of adhesion failure mechanisms or electrochemical properties in time. In this work have been studied these properties of a calcium titanate coating growth onto AISI 304 steel deposited by r.f. magnetron sputtering. It was found that the coating has a critical adhesive load of 6.53 § 0.14 N.With respect to its electrochemical properties potentiodynamic polarization curves show that the calcium titanate coating provides protection to AISI 304 steel. However, EIS indicates that even though metal dissolution occur through the pores in the coating, this leads to the precipitation of salts that block pores; this precipitates layer acts like an additional barrier to the metal dissolution in the systemeng
dc.format.extentpáginas 210-216spa
dc.publisherRevista Mexicana de Físicaspa
dc.relationRevista Mexicana de Física. Volumen 60, (mayo-junio 2014); páginas 210-216spa
dc.rightsDerechos Reservados - Universidad Autónoma de Occidentespa
dc.sourceinstname:Universidad Autónoma de Occidentespa
dc.sourcereponame:Repositorio Institucional UAOspa
dc.subjectCalcium titanate coatingeng
dc.subjectMagnetron sputteringeng
dc.subjectScratch testeng
dc.titleAdherence and electrochemical behavior of calcium titanate coatings onto 304 stainless steel substrateeng
dc.typeArtículo de revistaspa
dc.relation.referencesJ. D. Bronzino, The Biomedical Engineering Handbook: Biomedical Engineering Fundamentals, Medical Devices and SystemsTissue Engineering and Artificial Organs (Tercera edicion, Taylor and Francis Group, 2006)
dc.relation.referencesASTM F75 - 07. Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075), (West Conshohocken, PA, American Society for Testing and Materials, 2007)
dc.relation.referencesF.L. Nie, S.G. Wang, Y.B. Wang, S.C. Wei, and Y.F. Zheng, Dental materials 27 (2011) 677.
dc.relation.referencesF. Barragan, R. Guardi ´ an, C. Menchaca, I. Rosales, and J. ´ Uruchurtu, Int. J. Electrochem. Sci. 5 (2010) 1799
dc.relation.referencesASTM F138 - 08: Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673), (West Conshohocken, PA, American Society for Testing and Materials, 2008)
dc.relation.referencesASTM F139 - 08: Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673),( West Conshohocken, PA, American Society for Testing and Materials, 2008)
dc.relation.referencesJ. Faig-Mart´ı and F.J. Gil-Mur, Rev. esp. cir. ortop. traumatol 52 (2008) 113
dc.relation.referencesA. E. Porter, P. Taak, L. W. Hobbs, M. J. Coathup, G. W. Blunn, and M. Spector, Biomaterials 25 (2004) 5199
dc.relation.references. C. Ergun, R. Doremus, and W. Lanford, J. Biomed. Materi. Res. A 65 (2003) 336
dc.relation.referencesS. Holliday and A. Stanishevsky, Surf. Coat. Technol. 188 (2004) 741.
dc.relation.referencesN. Ohtsu, K. Saito, K. Asami, and T. Hanawa, Surf. Coat. Technol. 200 (2006) 5455
dc.relation.referencesJ.P. Wiff, V.M. Fuenzalida, J.L. Arias, and M.S. Fernandez, Mater. Lett. 61 (2007) 2739
dc.relation.referencesN. Ohtsu, C. Abe, T. Ashino, S. Semboshi, and K. Wagatsuma, Surf. Coat. Technol. 202 (2008) 5110
dc.relation.referencesB. Ben-Nissan, B. A. Latella, and A. Bendavid, Comprehensive Biomaterials 3 (2011) 63.
dc.relation.referencesASTM C1624 - 05 (Reapproved 2010): Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing, West Conshohocken, PA, (American Society for Testing and Materials, 2005).
dc.relation.referencesASTM G59 - 97 (Reapproved 2009): Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements, West Conshohocken, (PA, American Society for Testing and Materials, 2009).
dc.relation.referencesR. Ali and M. Yashim, J. Solid State Chem. 178 (2005) 2867
dc.relation.referencesH. Fuess, Fachbereich Materialwissenschaft, Technische Hochschule Darmstadt, Germany (Private Communication, 1991)
dc.relation.referencesV.I. Khitrova, M.F. Bundule, and Z.G. Pinsker, Kristallografiya 22 (1977) 1253
dc.relation.referencesV. Nelea, C. Morosanu, M. Iliescu, and I.N. Mihailescu, Surf. Coat. Technol. 173 (2003) 315
dc.relation.referencesK. Holmberg, A. Laukkanen, H. Ronkainen, K. Wallin, and S. Varjus, Wear 254 (2003) 278
dc.relation.referencesJ.A. Toque, M. K. Herliansyah, M. Hamdi, A. Ide-Ektessabi, and I. Sopyan, J. Mech. Behav. Biomed. 3 (2010) 324
dc.relation.referencesM. Metikosˇs-Hukovic´, E. Tkalˇcec, A. Kwokal, and J. Piljac, Surf. Coat. Tech. 165 (2003) 40
dc.relation.referencesB. A. Boukamp, Solid State Ionics 18-19 (1986) 136.
dc.relation.referencesR. M. Souto, M. M. Laz, and R. L. Reis, Biomaterials 24 (2003) 4213
dc.rights.creativecommonsAtribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)spa

Files in this item


There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record

Derechos Reservados - Universidad Autónoma de Occidente
Except where otherwise noted, this item's license is described as Derechos Reservados - Universidad Autónoma de Occidente